Shanghai Mitsubishi Elevator is from Japanese Mitsubishi, a base of elevators and escalators in Shanghai, is offering various kinds of J series escalators to meet different customer demands. Mitsubishi Elevator Shanghai is providing energy efficient escalators and large capacity lifts for commercial centers, convention centers and airports. Welcome to use Mitsubishi elevators and escalators.
As the core part of escalator, the Shanghai MITSUBISHI proud high accuracy helical reducer drive system, possessing high accuracy, high efficiency and low noise, can be rated as revolutionary break-though. Step sprocket adopts polyamine silencer thus make operation more quiet.
The design possesses lower energy consumption comparing to traditional worm gear reducer, selects installation of inverter system matching double diffuse reflection induction light spot and avoids idle motion impact, thus reduces energy consumption further. The indexes of operation efficiency,part service lift and energy saving all surge ahead.
The Shanghai MITSUBISHI unique single side positioning high accuracy U type guide rail, possessing smaller spacing between guide rail and
sprocket shaft thus prevents running deflection of step; makes ope ration more smoothly and riding more quiet and steady; make the entire installation realize excellent low noise performance, can be rated as important technical guarantee for Shanghai MITSUBISHI elevator to gain high end market such as hotel,shopping center and airport.
Service lift of high accuracy helical reducer can reach to 20 years(not including bearings): linear handrail drive has greatly prolonged lift of handrail belt; Unloading guide rail setting at upper curve part of escalator step circuit can make the roller not contact guide rail at upper curve part, which reduces wheel pressure and wearing of roller and prolongs lift of roller; Auto oiling device as standard configuration can also prolong service lift of all types of chains; Decoration components adopt stainless steel, which is durable in use.
Mitsubishi escalator reflects care of passengers everywhere: design of handrail belt inlet provides more safe protection; different horizontal steps provide customer various buffer space options; yellow demountable resin filler makes the safe riding region more eye-catching; design of step structure enables flexibly dismount or installation of steps on step circuit, and makes proof, and more firm. The unique disc type brake provides sufficient braking section area.
Vertical type arrangement of drive device, comparing to horizontal type, possesses advantages of more maintenance space, easier operation; flexible assembly/disassembly of steps,convenient installation and maintenance; auto oiling device, man-hour saving, and continuous regular operation of system.
Noble temperament is reflected in your hand and eye; exquisite balustrade, handrail, cover plate, skirt panel and illumination refl-ects people-oriented value everywhere.
Mitsubishi escalator possesses brief and streamlined appearance,material of first class, various styles for different decoration space. Main parts of the transit system are made of full hairline stainless steel; styles of balustrade panel comprises of various combination of tempered glass, stainless steel, and other material; multiple handrail belts in fashionable colors and colorful glass plated can be optional, and can be merged into any architectural environment.
Func. Name | Func. Code | Func. Description |
Standard Features | ||
01 Protection Against Phase Error and Loss | 3E | When input dynamic power source has any phase error or loss, cut off the main circuit and control circuit. |
02 Protect Of Unintentional Reverse Of Direction Of The Travel | ARP | If reversal travel appears during operation, this device will cut off power supply to main drive machine and brake. |
03 Auxiliary Brake | AUX-BK | Before travel speed exc-eeds the rated speed more than 1.4 times or changes specified direction, the auxiliary brake will stop the escalator. |
04 Working Brake | BRK | Drive unit configures a working brake; when working brake works, it will stop moving staircase. |
05 Comb plate Safety Device | CSS | When foreign matter is clamped in-between tread and comb plate, this device will cut off main drive machine and brake. |
06 Drive chain Safety Device | DCS | If drive chain is broke or abnormally extended, this device will cut off Power supply to main drive machine and brake. |
07 Emergency Stop But- ton | E-STOP | When emergency con- dition appears, operate this emergency stop button to cut off main drive machine and brake. |
08 Handrail inlet protec- tion | HGB | This long and flexible r- ubber cover locates at the inter of top and bottom handrail inlets to prevent such accidents as hand clamping. |
09 Over speed Governo- R1 | HGD1 | When travel speed exceeds the rated speed o- ver 1.2 times; this devic-e will work and cut off power supply to main drive machine and working brake. |
10 Over speed Governo- r2 | HGD2 | When travel speed exceeds the rated speed o- ver 1.4times; this device will work and cut off power supply to auxiliary brake. |
11 Handrail Inlet Safety Device | HGS | If foreign matters are engaged in handrail inter, this device will cut off power supply to main drive machine and brake. |
12 Step Chain Safety Device | SCS | If step chain is broken or abnormally extended, this device will cut off power supply to main drive machine and brake. |
13 Safety Device Agains- t Step Sagging | SRS | If any part of step is sagging or broken so that they cannot be regularly engaged with upper or lower comb plate, this device will cut off power supply to main drive machine and brake. |
Optional Features | ||
14 Safety Device for Be- nding Guide Rail | CRS | If objects are clamped in-between step tread and the adjacent one and thus causes abnormal operation of steps, this device will cut off power supply to main machine and brake. |
15 Protection Device Against Handrail | HBS | When handrail belt is broken or excessively Loosened, this device will cut off power supply to main machine belt broken and brake. |
16 Safety Device for Handrail Belt | HSS | When handrail belt speed is lower than step, this device will cut off power supply to main machine and brake. |
17 Elevator Supervising System | SMOS | This system adopts computer to supervise operation and trouble condition of moving walkway. |
18 Safety Device for Ski- rt Panel | SSS | When foreign matters are clamped in-between step and skirt plate, this device will cut off power supply to main drive machine and brake. |
Note:*Configured when HE>6000.
Item | Specification | Notes | ||
Nominal Handrail Width (mm) |
1200 | 1000 | 800* | |
Nominal Handrail Width (mm) |
1280 | 1080 | 880 | JS-B/JS-BF, JS-LB/JS-LBF |
1208 | 1008 | / | JS-SB/JS-SBF | |
1260 | 1060 | 860 | JP-B/JP-BF | |
Width of Step or Pedal (mm) |
1000 | 800 | 600 | |
Theoretical Transportation Capacity(people/hour) |
9000 | 6750 | 4500 | |
Series Model | JS-B/JS-BF, JS-LB/JS-LBF, JS-SB/ JS-SBF, JP-B/JP-BE |
|||
Inclination Angle | 30,35 | |||
Speed(m/s) | 0.5 | |||
Lifting Height(mm) | 2241~9500 | When inclination angle is 30° |
||
2571~6000 | When inclination Angle is 35° |
|||
Drive Power | 380V50Hz 3 Phases | |||
Lighting Power | 220V50Hz Single Phase | |||
Horizontal moving distance Of steps(mm) |
Horizontal 2 Steps;Horizontal 3 Steps;Horizontal 4 Steps |
When lifting height Is<=6000mm |
||
Horizontal3 Steps; Horizontal 4 Steps |
When lifting height Is>6000mm |
|||
Operation Environment | In Door | Please contact with Shanghai Mitsubishi Elevator Co.Ltd.(SMEC)for outdoor use. |
||
Passenger Photoelectric Type |
Built-in Skirt Panel Photoelec- tric |
Specification for varble frequency, optional configured for single elevator, Multiple elevators. |
||
External Photoelectric Column | Specification for variable frequency optional configured for single elevator. Please contact with Shanghai Mitsubshi Elevator Co.,Ltd. (SMEC) in the condition of multiple elevators. |
Note:*This specification is not available for Js-SB/JS-SBF.
Drive Power Capacity(3 Phases)
Nominal Handrail Width(mm) | Lifting Height(mm) | Drive Power Capaclty |
1200 | HE<=4500 | 8 |
4500<=6500<=6500 | 10.4 | |
6500<=9500<=9500 | 15.4 | |
1000 | HE<=5500 | 8 |
5500<=6800<=6800 | 10.4 | |
6800<=9500<=9500 | 15.4 | |
800 | HE<=6500 | 8 |
6500<=9500<=9500 | 10.4 | |
Lighting Power Capacity(Single Phase) | ||
Series Model | Lifting Height(mm) | Lighting Power Capacity |
JS-LB/JS-LBF | HE<=4000 | 2 |
4000<=6000<=6000 | 2.3 | |
6000<=9500<=9500 | 2.5 | |
JS-B/JS-BF | HE<=9500 | 1.3 |
JS-SB/JS-SBF | HE<=9500 | 1.3 |
JP-B/JP-BF | HE<=9500 | 1.3 |
Item | Standard | Optional | Notes |
TJ(MM)* | 2560 | 2560 ~ 5260 | HE<=6000mm/INC30°/ STEPHU2 |
2970 | 2970 ~ 5670 | HE<=6000mm/INC30°/ STEPHU3 |
|
3380 | 3380 ~ 6080 | HE<=6000mm/INC30°/ STEPHU4 |
|
2600 | 2600 ~ 5300 | HE<=6000mm/INC35°/ STEPHU2/TK>=2350mm |
|
3010 | 3010 ~ 5710 | HE<=6000mm/INC35°/ STEPHU3/TK>=2350mm |
|
3420 | 3420 ~ 6120 | HE<=6000mm/INC35°/ STEPHU4/TK>=2350mm |
|
2375 | 2375 ~ 2684 | HE<=6000mm/INC35°/ STEPHU2/TK>=2350mm |
|
2970 | 2970 ~ 5670 | 6001<=HE<=6500/STEPHU3 BNW1000,1200 |
|
3170 | 3170 ~ 5670 | 6001<=HE<=6500/STEPHU3 BNW800 |
|
3380 | 3380 ~ 6080 | 6001<=HE<=6500/STEPHU4 BNW1000,1200 |
|
3580 | 3580 ~ 6080 | 6001<=HE<=6500/STEPHU4 BNW800 |
|
3450 | 3450 ~ 6150 | 6501<=HE<=9500/STEPHU3 | |
3860 | 3860 ~ 6560 | 6501<=HE<=9500/STEPHU4 | |
TK(mm)* | 2290 | 2290 to 5000 | HE<=6000/INC30°/STEPHU2 |
2700 | 2700 ~ 5410 | HE<=6000/INC30°/STEPHU3 | |
3110 | 3110 ~ 5820 | HE<=6000/INC30°/STEPHU4 | |
2350 | 2265 ~ 5060 | HE<=6000/INC35°/STEPHU2 | |
2760 | 2760 ~ 5470 | HE<=6000/INC35°/STEPHU3 | |
3170 | 3170 ~ 5880 | HE<=6000/INC35°/STEPHU4 | |
FJ(mm) | 1030 | HE<=6500 | |
1100 | 6501<=HE<=9500 | ||
FK(mm) | 1030 | ||
FC(mm) | 915 | ||
Escalator Width ( mm) | 1550 | BNM1200 | |
1350 | BNM1000 | ||
1150 | BNM800 | ||
THE | 0 ~ 11000 | BNM1200: intermediate support number 1 | |
0 ~ 11400 | BNM1000: intermediate support number 1 | ||
0 ~ 11700 | BNM800: intermediate support number 1 | ||
LB | 0 ~ 11000 | BNM1200: intermediate support number 1 | |
0 ~ 11400 | BNM1000: intermediate support number 1 | ||
0 ~ 11700 | BNM800: intermediate support number 1 |
Notes:
1. Please contact with relative salesman of Shanghai Mitsubishi Elevator Co.,Ltd. (SMEC)
2. Min.values of TJ.TK size are recommended.